Released versions of package CRT

Released versions: 1.00 (1988, June): Preliminary version, contains only subroutines for model specification, no complete ray tracing subroutines. 2.00 (1990, February): Common release with model specification routines. First consistent version of the ray tracing program. The routines determining the take-off parameters of rays are awfully primitive. Poorly debugged. 3.00 (1991, January): Common release with model specification routines. New version of the file 'rpar.for' determining the take-off parameters of rays: one-parametric boundary-value ray tracing. Principal errors removed in files 'ray.for', 'raycb.for' and 'trans.for'. Some of the points of intersection of rays with the given surfaces may be selected for storing the computed quantities - minor changes in files 'ray.for' and 'writ.for'. 4.00 (1992, December): MODEL and CRT packages has been split: 'raycb.for': Split into 'means.for' (MODEL) and 'raycb.for' (CRT). 'crt.for': Split into 'crt.for' and 'crtin.for', name of the data set CRT read from the * unit. 'ray.for': Indices of end surfaces supplemented with the signs, boundaries of the computational volume enabled to be storing surfaces. 'raycb.for': *** Considerable changes and corrections. *** 'trans.for': Corrections for nearly normal incidence, and for weakly refracted or nearly grazing rays corrected. 'init.for': Definition of material parameters, and of the signs of auxiliary surfaces at the initial points corrected. 'rpar.for': Reading the data for an auxiliary surface specifying the profiles enabled. 'writ.for': Specification of the names of output files slightly generalized, independent variable X along rays added to the output files, some other minor changes. 'scropc.for': Minor changes. E.g., refreshing wave index on the screen added, renumbering of colour indices removed (unfortunately, the renumbering may be useful on some computers). *** new FORTRAN77 source code files ***: 'calcomp.for': CalComp to GKS graphic interface. 'ap.for': Applications and processing of the results of complete ray tracing, only the first 1/3 of subroutines. 'inv1.for', 'inv3.for', and 'inv4.for': Provisions towards a tomographic inversion. 4.10 (1994, January): 'ap.for' split into 'ap.for' and 'apvar.for'. 'crtin.for', 'code.for', 'ray.for', 'trans.for', 'init.for', 'rpar.for', 'writ.for', 'calcomp.for', 'ap.for', 'apvar.for', 'inv1.for', 'inv3.for', 'inv4.for': Error messages, previously generated by statements like STOP 'Error...', are now generated by PAUSE 'Error...' followed by the STOP statement, in order to suspend the batch files in the case of error (the date of subroutines not updated). 'crtin.for', 'code.for', 'ray.for', 'init.for', 'rpar.for', 'writ.for', 'scropc.for', 'calcomp.for', 'ap.for': Each BLOCK DATA subprogram has been declared EXTERNAL in the subroutine designed to read or initialize the data shared. The subroutine is the first subroutine in the corresponding file, after the BLOCK DATA subprogram, and was always assumed to be called before the data in the corresponding common blocks can be used. 'calcomp.for', 'ap.for': External procedures declared EXTERNAL. 'code.for': Subroutine CODE1 has been corrected and updated - determination of the common parts of elementary waves enabled. 'rpar.for': Several bugs fixed. Subroutines restructured in order to separate one-parametric shooting from the parts useful also for possible future upgrade to two-parametric shooting. Specification of profiles along coordinate planes simplified. Profile coordinates in a separate file enabled. *** change in input data: Index of the second X-function (receiver coordinate) reserved for future extensions *** 'writ.for': Generation of error message 557 corrected. Indications IEND,ISHEET added to the output files with initial points of rays. 'ap.for': Wrong second travel-time derivatives fixed. Statements dealing with curvilinear coordinates denoted by '*' in the first column. 'crt.for', 'code.for', 'raycb.for', 'init.for', 'rpar.for', 'writ.for', 'scronul.for', 'scropc.for', 'calcomp.for', 'ap.for', 'apvar.for', 'inv1.for': Other minor fix-ups and changes. *** new FORTRAN77 source code files ***: 'crtray.for': Program converting the unformatted output of program CRT into formatted files with rays suitable for plotting. 5.00 (1996, September): 'crt.for': Minor update. 'code.for': Minor correction of comments. 'raycb.for': Updated. Subroutine PSHIFT considerably. Boundaries of computational box enabled as storing surfaces. 'trans.for': *** Reduced amplitudes corrected. *** 'init.for': *** Updated, input data changed. *** In particular, initial line and surface fixed. 'rpar.for': *** Considerably corrected and updated, input data changed. Split into 'rpar.for' and 'rp2d.for'. Calls to 'rp3d.for' enabled. *** 'writ.for': *** Updated. Input data changed. *** Indication IREC added to the output files with initial points of rays, files with indices of rays forming homogeneous triangles in the ray-parameter domain now generated. Check for nonexisting rays supplied. 'scropc.for': Updated. Default plotting units switched to inches. 'ap.for': *** Considerably corrected and updated. *** 'crtray.for': Considerably updated. 'plotvdi.for','ploth.for','plotvax.for': Discarded. 'calcomp.for': Moved to package MODEL. 's1-code.dat': Renamed to 'code1.dat'. 's1-crt.dat','s1-rpar.dat','s2-crt.dat': Changed, renamed and moved to subdirectory 'len'. 'inv1.dat','points.dat','ftt.dat': Changed, renamed and moved to subdirectory 'u2d'. 'inv3grid.dat': Renamed to 'inv3.dat'. '*.pre': Updated, renamed to 'prem*.*', and moved to subdirectory 'prem'. 'crtpc.bat': Discarded. *** new ***: All files converted from UPPERCASE to both UpperCase and LowerCase (for better reading and Unix systems), INCLUDE statement introduced for COMMON blocks. '*.inc': Include files with COMMON blocks. SAVE statement is now used consistently for COMMON blocks All files with main programs supplemented with the INCLUDE statements to include all files with called subroutines to simplify the compilation and linking considerably. MS-DOS batch files supplemented with corresponding Unix scripts. 'rp3d.for': Subroutines to control the two-parametric shooting algorithm for 3-D two-point ray tracing. 'scronum.for'... New simple basic version of the screen output subroutines. 'crtout.for','ttsort.for','crt2p.for','crtpts.for': Subroutines and programs to convert or process the unformatted output of program CRT. 'green.for': Program to convert the output of program CRT into the ray-theory elastodynamic Green function. 'greenss.for': Program to read the ray-theory elastodynamic Green function and to generate time-domain synthetic seismograms or frequency-domain response functions. 'ss.for' and 'sp.for': Programs to generate and plot synthetic seismograms, adopted from package SW84, updated for the list-directed input and the GSE data exchange format, commented. 'srpcrt.bat','lcrt.bat': Sample MS-DOS batch files. 'len','prem','elf1','u2d': Subdirectories with examples of input data corresponding to different seismic models. 5.10 (1997, October): *** probably not all changes are listed here *** 'inv1.for' split into 'soft.for', 'inv1soft.for' and 'inv1tt.for'. 'soft.for', 'inv1soft.for', 'inv3.for','inv3.dat','inv4.for' moved to package MODEL. 'crt.doc' renamed to 'crtdoc.htm' and revised. 'lcrt.bat' renamed to 'fcrt.bat' and revised. 'code.for','ray.for','init.for','rpar.for','rp2d.for': BLOCK DATA subprograms cancelled. 'crtpts.for','green.for','greenss.for','ss.for','sp.for', 'inv1tt.for': Memory managed by means of 'ram.inc'. Descriptions corrected and updated in most files. All error descriptions moved towards the corresponding reporting statements. Errors renumbered in some files. Warnings written to log files instead of the console. 'rpar.for': KMAH index included also in the history of an unsuccessful ray. New option to include or not the boundaries of the computational volume into ray histories. Default input value of IPOINT changed. 'rp3d.for': *** Considerably corrected and updated. *** 'ap.for': Reading just initial points enabled. *** Severe bug fixed in AP21. *** 'writ-s.dat' renamed to 'writsrf.dat' and 'writall.dat' supplemented. *** new *** All Fortran files supplemented with HTML references. 'rpplot.for': Plotting ray parameters. 'crt2d3d.for': Converting 2-D results of CRT for MTT. 'mtt.for': Interpolation within ray cells. 'mttgrd.for': Converting multivalued travel times produced by program MTT into several singlevalued grids corresponding to individual ray histories. 5.20 (1998, October): All error messages in the Fortran files, previously generated by statements like PAUSE 'Error ...', are now generated by CALL ERROR('...') in order to enable to fit the error handling for a particular computer by editting file 'error.for' (the date of subroutines not updated). Most warning messages in the Fortran files, previously generated by statements like PAUSE 'Warning ...', are now generated by CALL WARN('...'). 'crtdoc.htm' split into 'crtdoc.htm' and 'crtver.htm', list of files moved to 'crt.htm'. 'ss.for','sp.for': *** Moved to package FORMS. *** 'crt.for': Subroutine LUWARN moved to '../forms/error.for'. 'raycb.for','init.for','crtpts.for': *** Severe bugs fixed. *** 'rpar.for': Now writing the table of ray histories and optionally checking whether a ray satisfies the whole code. 'rp2d.for': Revised. 'rp3d.for': *** Considerably revised: Distance of a two-point ray from the receiver may now exceed XERR (with warning in logout file), some bugs fixed. *** 'rpplot.for': *** Input data changed *** (name of output plot can be specified). CRT output files containing more than one elementary wave may now be used. 'rpsymb.for': Bugs causing stack overflow in PostScript fixed. 'mttgrd.for': *** All output grids (data cubes) now written into a single file by default, N4 appended to input SEP file. *** 'ray.for': Comments updated. 'crtout.for','rparc.inc','rp2d.inc','rp3d.inc', 'rpplot.inc','mtt.inc': Minor corrections. 'ap.for': Bugs in subroutines AP00 and AP03 fixed. 'inv1tt.for': A bug fixed. *** new *** All MS-DOS batch files '*.bat' and Unix scripts '*' replaced by corresponding Perl scripts '*.pl' or by history files '*.h' containing the lines specifying how to run the programs. 'crtcart.for': Program converting rays calculated by program 'crt.for' from curvilinear to Cartesian coordinates, which are required by 'mtt.for'. 'mtt.for': *** Considerably revised: Bicubic travel-time interpolation introduced, errors on sides of ray cells removed, 'indexx.for' used to speed up sorting of ray tubes, interpolation of slowness vector enabled, minor errors in caustic regions connected with number of roots of cubic equation removed. *** 'green.for': *** Input data changed to SEP format *** Calculating frequency-dependent elementary Green functions using coupling ray theory in anisotropic models. 'wan.for': Subroutines for coupling ray theory in weakly anisotropic models. 'greenss.for': *** Input data changed to SEP format *** Able to read frequency-dependent elementary Green functions (e.g., of coupling ray theory for S waves). May include the response of the transmission through a stack of fine horizontal layers at each receiver location. 5.30 (1999, June): 'crt.for','crtin.for','init.for','rpar.for': *** Main input data changed to SEP format *** 'init.for': Updated to correspond to the new version of subroutines BLOCK and BLOCKS of file 'model.for' of package MODEL, bug in subroutine SPHERE for INIPAR=3 fixed, *** input data changed (SEP format) *** 'raycb.for','rpar.for','rparc.inc','rp3d.for','rp3d.inc': *** Control of the width of ray tubes enabled. *** Error reports in 'rpar.for' improved. 'mtt.for','rpplot.for': *** Main input data changed to SEP format *** 'mtt.for','mtt.for': *** 2-D computations enabled (without crt2d3d). Interpolation of new quantities supplemented. Several bugs connected with rays of zero length fixed. *** Interpolation in tetrahedra possible after minor editing the code. 'green.for': The bug related to the names of output files of program 'crt.for' fixed. 'wan.for': *** Computation of travel time corrections fixed. New criterion for the maximum error of propagator matrix. Models with structural interfaces enabled (but not fully debugged!) *** 'greenss.for': Fatal bug when writing zero frequency response function fixed. 'scropc.for': A bug fixed. 'ray.for','writ.for','ap.for','rpsymb.for': Minor correction of comments. 'code.dat' renamed to 'code2.dat', because it contain codes of waves reflected at the first and second interface. 'rm/rm-mod.dat': Free space simple block added. 'crt.h', 'len/lenb-rpa.dat', 'len/lenz-rpa.dat', 'elf1/elf1*crt.h': Created to reflect the conversion of input data for program crt.for to the SEP format. 'srpcrt.pl','crt.dat','rpar.dat','len/len-crt.h', 'len/lenb-crt.h', 'len/lenz-crt.h', 'len/leni-mtt.h', 'prem/prem-crt.h','u2d/u2d-*.h','rm/rm-fd.h','qi/qi-ss.h', 'elf1/elf1*crt.dat','elf1/elf1*.pl','98/98-mtt.h', '98/98-ss.h','*/*-crt*.dat','*/*-rpa*.dat': Modified to reflect the conversion of input data for program crt.for to the SEP format. 'len/len-crt.h', '98/98-ss.h': *** Upgraded to generate 3-D VRML97 representation of two-point rays together with structural interfaces. *** *** new *** 'code.dat': Code of P wave transmitted at all interfaces (the most common wave code). '98/98-mod.h', '98/98-cam*.dat' and '98/98-dli*.dat': History file to generate 3-D VRML97 representations of structural interfaces and velocity distribution in model 98, and the corresponding data desribing initial positions of the camera and the directional lights. 'wrl': Subdirectory with examples of 3-D VRML97 representations of rays with structural interfaces. 5.40 (2000, May): 'crt2d3d.for', 'crtray.for', 'crtpts.for', 'srpcrt.pl': *** Input data changed to SEP format. *** 'mttgrd.for': *** Input data changed. *** Multiple files from * device moved to the history file. 'crt.htm': Considerably revised. 'crtdoc.htm' discarded (information moved to 'crt.htm'). 'crt.for','init.for','initd.inc','rpar.for','scronum.for': *** Ray tracing for multiple sources enabled. *** 'init.for': A bug in initialization of IY(11) fixed. 'rpar.for': *** Severe bug in the determination of ray histories fixed. Severe bug in the estimation of the widths of ray tubes fixed. *** 'rp2d.for': Creation of ray tube limited by non-existing ray during initial-value ray tracing fixed. 'rp3d.for', 'rp3d.inc': Several bugs fixed. 'scropc.for': Enter from standard input to confirm erasing of the ray diagram of each elementary wave is no longer required, but may optionally be enabled. 'apvar.for': Subroutine AP28 moved to 'ap.for'. 'rpplot.for': Minor corrections. 'mtt.for' split into 'mtt.for' and 'mttq.for'. File 'mttq.for' contains specification of interpolated quantities and may simply be editted in order to add new user-defined quantities for interpolation. 'mtt.for': Some bugs, mainly in 2-D interpolation, fixed. 'mtt.inc': Minor changes. 'mttq.for': Interpolation of width of Gaussian beams added. 'mttgrd.for': Numbers in generated filenames decreased by 1. 'green.for': *** Multiple elementary waves enabled. *** 'greenss.for': A bug related to attenuation at zero frequency fixed. 'inv1tt.for' renamed to 'invtt.for' and *** considerably updated. *** 'code.dat' renamed to 'codep.dat' and 'code2.dat' to 'codep2.dat'. Subdirectories with the data for particular models moved to new package DATA. 'len-src.dat' moved to package DATA. 'rpar.dat' renamed to 'len-rpar.dat' and moved to package DATA. 'crt.h' and 'crt.dat' renamed to 'len-crti.h' and 'len-crt.dat', updated and moved to package DATA. 'wan.for': Cosmetic changes. 'crtin.for', 'writ.for': Comments updated and corrected. *** new *** 'calcompx.c': CalComp to Xlib (X Window) interface. 'crtx.mak': Makefile to compile and link 'crt.for' with 'calcompx.c'. 'wfsrf.for', 'wfsrf.inc': Program to generate wavefronts composed of polygons for display purposes. 5.50 (2001, June): 'crtin.for','writ.for','writ.inc','scronum.for', 'scronul.for','scropc.for','ap.for','pointc.inc': *** Output files of ray tracing by program 'crt.for' supplemented with source index ISRC. *** 'crt2p.for', 'crtcart.for': Minor changes related to reading of the output files of program 'crt.for'. 'ray.for': Comments updated. 'rp3d.for': *** Error in coverage of ray domain fixed. *** 'mtt.for': *** Second derivatives of the complex-valued travel times of Gaussian beams, which were specified by constant real-valued parameters in version 5.40, may depend on two-way travel time and ray parameters, and may be specified on an optional ray-parameter grid. *** 'mttq.for','mttq.inc': Subroutines of file 'mttq.for' are now used also by program 'wfsrf.for'. 'mttwf.inc': New file with declaration of common block used by both programs 'mtt.for' and 'wfsrf.for'. 'wfsrf.for', 'wfsrf.inc': *** Many new quantities may be computed along wavefronts and written to output file. *** List of the quantities, which may be computed along wavefronts, has been unified with program 'mtt.for'. Subroutine file 'mttq.for' is now used by both 'wfsrf.for' and 'mtt.for'. 'crtpts.for': *** Parameter ISRC renamed to KREC. *** 'crtpts.for','crtray.for','crtout.for': New parameters KSRC and KTWO. 'green.for','wan.for': Maximum error of the quasi-isotropic projection of the polarization vectors now checked and reported. Various kinds of quasi-isotropic approximation now enabled for testing purposes. *** New input parameters ERRQI, QICHM, QITT, QIDT. *** *** Tests of the coupling ray theory calculations in models with structural interfaces enabled. *** Error messages corrected. 'greenss.for': Source coordinates in the comment lines of the GSE file now identified by parameter names X1SRC, X2SRC and X3SRC, instead of XS1, XS2 and XS3. 'invtt.for': Calculation of the checksum fixed. Minor corrrections of error messages and screen output. 'srpcrt.pl': ISRC changed to KREC. *** new *** 'ap.for','apvar.for': Simultaneous quadrature of several sets of equations by several invocation of subroutine AP28 at each point of ray has been enabled, which is important for optimization of the shape of Gaussian beams. Optional calculation of the variations of the line integral of the density for the gravimetric inversion has been included. 'gbopt.for': New program to calculate quantities for optimization of the shape of 2-D Gaussian beams for prestack migrations. 5.60 (2002, May): 'crtin.for': Input data description updated. 'ray.for': Comments updated. 'rp2d.inc': Comments updated. 'rp3d.for': Error messages and comments updated. 'writ.for': Description of the input data files improved. *** Output files are written only if the first components of their filenames are not blank. *** 'writ.for','rp2d.for','rp3d.for': Subroutine WRITA renamed to WRITTR. 'writ.for','rpplot.for','crt2d3d.for','mtt.for','wfsrf.for': *** Identification of individual elementary waves in file 'CRT-T' coded. *** 'scropc.inc': Comments updated. 'ap.for': *** Serious bug in AP28 fixed. *** 'ap.for','green.for','wan.for','mttq.for': Subroutine AP21 calculating the Green function upgraded to optionally consider correct eigenvectors of the Christoffel matrix. *** Program 'green.for' now need not apply the quasi- -isotropic approximation of the polarization vectors. *** 'rpplot.for': *** Parameter NWAVE renamed to IWAVES. *** 'crt2d3d.for': Description of input data improved. 'mtt.for','mttq.for': *** Parameter NWAVE renamed to NWAVES. *** Program now works with all the elementary waves stored in the corresponding CRT output file 'CRT-T'. 'wfsrf.for': Description of input data improved. *** new *** 'rp2d.for','rp3d.for','rp3d.inc','writ.for','writ.inc': Writing of the CRT output file 'CRT-B' with indices of boundary rays coded. 'green.for','wan.for': Optional calculation of second-order perturbations of anisotropic travel times of S waves. 5.70 (2003, May): 'crt.for', 'crtin.for', 'dcrt.inc', 'initc.inc', 'rpard.inc', 'rparc.inc', 'calcompx.c', 'crtx.mak': Formal updates related to new file 'scro.for', see below. 'writ.for': Comments updated. 'rp2d.for': Small bug in searching for boundary rays fixed. 'rp3d.for': Small bug in internal evidence of two-point rays fixed. *** New parameter PRM0(5) for control of the distance of two-point rays from the receivers. *** 'ap.for','apvar.for': Minor updates of error messages. 'crtcart.for': *** Fatal error (wrong number of unit for reading) corrected. Output files supplemented with source index ISRC. *** 'crtpts.for': Comments updated. 'green.for','wan.for': INCLUDE commands moved from 'wan.for' to 'green.for'. Description of the output file QILST updated. 'greenss.for': A minor change in output format. 'invtt.for': *** Source and receiver points may now be specified in multiple files, instead of a single file. Structural interfaces may now be inverted. Structural interfaces and material parameters may be inverted separately. Input parameter DIST must now be specified. *** Error messages and comments updated, declaration of variables improved. *** new *** 'crt.for', crtin.for', 'dcrt.inc', 'raycb.for', 'init.for', 'initd.inc', 'initc.inc', 'rpard.inc', 'rparc.inc': Ray tracing of the anisotropic common ray coded for the models without structural interfaces. 'init.for', 'initd.inc': New rotational vector enabling to rotate the local spherical coordinate system for specification of ray take-off parameters. New option enabling to supplement point sources with the direction of the local axis of the spherical coordinate system for specification of ray take-off parameters. 'scronul.for', 'scronum.for', 'scropc.for' and 'scropc.inc' replaced by 'scro.for' and 'scro.inc'. Screen output is controlled by new input parameters. 'crtlew.for': Program to calculate the length of ray segments according to the given angular intervals. 5.80 (2004, June): 'crt.for','crtin.for','ray.for','raycb.for','raycb.inc', 'trans.for','coef.for','init.for','initc.inc','rpar.for', 'rp2d.for','writ.for','scro.for','ap.for','pointc.inc', 'crt2p.for','crtcart.for','gbopt.for': HTML links to the paper on C.R.T. added to the source codes (the dates of files and subroutines not updated). 'crt.for': File 'forms.for' is now included to 'crt.for'. 'ray.for': Comments updated. 'raycb.for','crtin.for','ray.for','dcrt.inc': Error requirements on subroutine CROSS are corrected with regards to the rounding errors, new SEP parameter UEBMUL. 'raycb.for': *** Error in calculating the R.C.C.S. basis vector in anisotropic medium corrected. *** 'init.for': *** A bug in rotation of ray take-off parameters fixed. *** 'rpar.for': *** The bug, disabling multiple ray-parameter domains for a single elementary wave, fixed. *** Comments updated. 'rp3d.for': Small bugs in searching for boundary rays fixed. A small bug in decision between initial-value ray tracing and controlled initial-value ray tracing according to the value of AERR fixed. Formats of warnings improved. 'writ.for','scro.for','scro.inc','ap.for','rpplot.inc', 'mtt.for','mttgrd.for','wfsrf.for': Comments updated. 'crtout.for','crtpts.for','crtray.for','green.for': Proper source name in subroutine TXT2 used. 'crtout.for','crtpts.for': Wrong omitting of small amplitudes corrected. 'wan.for': Comments updated. *** new *** 'ray.for','raycb.for','writ.for','writ.inc': New reason IEND=39 of the termination of the computation of a ray (too small velocity). 'writ.for','writ.inc','pointc.inc','ap.for','crt2d3d.for', 'crt2p.for','crtcart.for': Unformatted output files of program CRT now contain also the KMAH index and the upper error bound for ray tracing. 'an.for': New file with subroutines to modify the output of subroutines of file 'ap.for' in anisotropic media. The current version contains subroutine AN03 correcting the basis vectors of the intrinsic ray-centred coordinate system in anisotropic media. 'rpplot.for': The program may now display also the results of an initial-value ray tracing and of a one-parametric shooting. The reference surface may be parameterized also by the third model coordinate. 'crtout.for','crtpts.for': Complex amplitude may be written also as the absolute value and phase. 'invtt.for': Upgraded from inversion for model parameters to simultaneous inversion for hypocentral parameters (coordinates and time). 5.90 (2005, June): 'crtin.for': Comments updated. 'rpar.for','initc.inc': Comments updated. 'rp2d.for','rp3d.for','rp3d.inc','writ.for','rpplot.for', 'crt2d3d.for','mtt.for','wfsrf.for','crt2p.for', 'crtcart.for','crtlew.for','gbopt.for': Comments updated (change of "CRT-?" to "'CRT-?'") without change of dates and versions. 'rp3d.for': Minor correction. 'writ.for': The bug in determining the source index fixed. 'writ.for','writ.inc': The maximum number of available logical unit numbers increased to 30. 'ap.for': Indication of a new ray in subroutines AP00, AP02, and AP03, failing for multiple sources, fixed. Minor changes in AP03, which should not influence its output. 'an.for': Comments updated. 'apvar.for': Error, occuring in subroutine AP29 for rays terminating at the boundary of the computational volume, corrected. 'crtout.for': A small bug in writing fixed. 'rpplot.for': A small bug in a warning generation fixed. New SEP parameter CALCOPS for PostScript file setup. 'mtt.for': Sorting of arrivals at a gridpoint generalized (new SEP parameters MTTSORT and MTTORDER). 'mtt.for','mttq.for': Interpolation of amplitude modified for Kirchhoff migration (SEP parameter AMPKI). 'mtt.for','wfsrf.for','mttgrd.for','crtray.for', 'crtpts.for','green.for' ... New SEP parameters MINDIG and MAXDIG (without change of dates and versions). 'green.for': Comments updated. 'wan.for': A bug in second-order perturbations along isotropic rays fixed. *** new *** 'ap.for': New subroutine APYYF to mutually exchange values stored in arrays Y and YF. May be used, e.g., when calling subroutine AP03 for a point O/F stored in YF. 'rpplot.for': Elementary wave to be plotted may be selected also according to the index of the source. Default value of parameter IWAVES changed, but the change should not affect almost any existing computation. 'green.for','wan.for': The second-order travel-time perturbations from anisotropic common rays to anisotropic-ray-theory rays and to isotropic common rays can be calculated along anisotropic common rays. 'watable.for': Program for calculation of differences between travel times and their approximations by the second order perturbations. 6.00 (2006, June): 'crtin.for': Comments updated. 'init.for': *** Error in initial slowness vector in subroutine INIT2 fixed. *** 'init.for','mttq.for','mttgrd.for','crtout.for', 'greenss.for','gbopt.for': Undefined value UNDEF is now determined by function UARRAY of file 'forms.for'. 'rpar.for': Unit-sphere metric tensor for a point or line source corrected. Check on positivity of ANUM and BNUM for two-parametric ray tracing added. 'crtcart.for': Minor changes due to the new non-Cartesian coordinate systems in file MODEL. Minor changes in the screen output. 'green.for': New check for a point source. 'crtout.for','crtpts.for','wan.for': Comments updated. 6.10 (2007, June): 'rpar.for','rpard.inc': Comments updated. 'crt.htm': Comments updated. 'mtt.for': Error in subroutine CIQUAR fixed. Comments updated. 'mtt.for','wfsrf.for': Subroutine INDEXX replaced by INDEXI. 'mtt.for','mttgrd.for': New SEP parameter NUMLIN (no change in file dates). 'invtt.for': Modified to conform to the new programs for matrix operations. 'gbopt.for': Moved to packaga DATA, directory MAR. *** new *** 'codes.dat': New file CODE to specify refracted S wave. 6.20 (2008, June): 'rpar.for': Minor error in writing to the output log file fixed. 'ap.for': Unnecessary declarations in subroutine APYYF removed. 'mtt.for','mttq.for','mtt.inc','wfsrf.for','mttwf.inc': New quantities which may be interpolated between rays or recorded along wavefronts. Files with quantities specified on the ray-parameter grid may now contain undefined values in the gridpoints not used during interpolation. 'mttq.for': A bug in calculation of GBW22 and GBW2 corrected, comments updated. 'greenss.for': Comments updated. 'crtout.for': Comments updated. 'invtt.for': Modified to conform to the new versions of subroutines of file 'mat.for'. Format 'G' changed to 'E'. Attribute TYPE="..." added into all HTML links to text/html or text/plain files with extension other than .htm (without date or version change). *** new *** 'crt.for','crtin.for','rpar.for','writ.for': New input SEP parameters RPAREW and WRITEW which enable repeated use of the input data RPAR-(4) and WRIT-(6). 'init.for','initd.inc': Coordinates of point sources specified in file SRC are read sequentially. 'mtt.for': Interpolation to the individual points coded. 'green.for': Green functions for multiple point sources specified in file SRC may be calculated. Green functions in the output file may be sorted according to the different sorting criteria. 6.30 (2009, June): E-mail addresses replaced by WWW addresses (without date or version change). 6.40 (2010, June): 'ap.for','mttq.for': Dealing with infinite amplitudes corrected. 'crtpts.for': Comments updated (no date or version change). 'rp3d.for': Wrong dealing with parameter PRM0(2) corrected. 'mtt.for': Exceptional appearence of too small interval for solving the cubic equation removed. Comments updated. 'mtt.for','wfsrf.for': Comments updated. 6.50 (2011, May): 'green.for': Description of input parameter MODEL updated. 'greenss.for': Comments updated, variables renamed. 'crtlew.for','mtt.for': Indentation of comments corrected. 'code.for': Comments updated. 'mtt.for': Small bug causing unnecessary appearence of warning MTT-30 fixed. A bug causing error MTT-08 fixed. 'wan.for': Array dimension MNEWP extended, memory management of arrays KNEWP, RNEWP improved. 'rpplot.for': New parameter SHOWPAGE useful to disable the PostScript 'showpage' command. 'rpar.for': Comments corrected. *** new *** 'init.for','writ.for': Writing of initial points of non existing rays to file CRT-I coded. 6.60 (2012, June): 'code.for': Comments updated. 'coef.for': A bug in calculation of R/T coefficients fixed. 'green.for','wan.for': Output of the values of eigenvectors to an optional output file coded. 'greenss.for': New parameter GSEWIDTH to control the width of the output field reserved for one integer value of the seismogram. 'invtt.for': Comments updated. 'mtt.for': Description of input SEP parameters improved. 'mttgrd.for': Description of input data updated. 'wan.for': Calculation of angular rotation of eigenvectors corrected. Normalization of vectors in subroutine for vector projection added. Comments updated. *** new *** 'green.for','wan.for': Prevailing-frequency approximation of the coupling ray theory coded. 7.00 (2013, June): 'crtin.for': New check whether the input files are specified. The description of the azimuthal equidistant projection (under the description of INIPAR) corrected. 'raycb.for': Integer function KOOR in RAYCB, and V2 in FCTA declared. Considerably improved description. 'rpar.for': Integer function LUWARN in RPAR2 and SRPARH, and SCALE in RPAR4 declared. 'ray.for','pointc.inc': Considerably improved description. 'ap.for': Subroutine APYYF corrected. Description updated. 'an.for': Updated to comply with the new version of 'hder.for' from package MODEL. 'crt2d3d.for','crt2p.for': *** Programs out of order since version 5.50 corrected. *** 'mttq.for': *** Wrong projection of the P-wave polarization vector onto the basis vector of the ray-centred coordinate system in the case of an anisotropic model corrected. *** A bug in reading of the names of interpolated coordinates of the initial points of rays fixed. 'green.for': Wrong number of error GREEN-09 corrected, the message of error GREEN-08 corrected, description of input parameters updated. Possibility of wrong projection of the P-wave polarization vector onto the basis vector of the ray-centred coordinate system in the case of an anisotropic model corrected. Comments updated. 'wan.for': *** Two errors in calculation of the propagator matrix for prevailing frequency approximation corrected. Error in calculation of DEFI for prevailing frequency approximation corrected. *** Description of error WAN-03 corrected. Missing declaration of subroutines HDER and VELOC added. Updated to comply with the new version of 'hder.for' from package MODEL. Comments updated. 'rpplot.for': Error message updated. 'wanpfa.for','wan.for': Original file 'wan.for' has been split into two new files 'wanpfa.for' and 'wan.for'. File 'wanpfa.for' now contains subroutines called from both 'wan.for' and 'crtpfa.for'. 'mtt.for','mttq.for','rp3d.for','rpplot.for','rpsymb.for', 'watable.for','wfsrf.for': Comments updated. *** new *** 'apw.for': New subroutines to write the quantities at the points of rays into unformatted output files. The quantities are stored in common block /POINTC/ defined in file 'pointc.inc'. 'crt.for','writ.for','writ.inc','crt2d3d.for','crt2p.for', 'crtcart.for': Writing the quantities at the points of rays into unformatted output files has been unified using the subroutines of file 'apw.for'. 'ray.for','raycb.for','raycb.inc','init.for','initc.inc', 'writ.for','pointc.inc','ap.for','mtt.for','mttq.for', 'green.for','wan.for': Reference polarization vectors introduced (basis vectors of the ray-centred coordinate system were incorrectly substituted in the previous versions). 'mtt.for': Option to choose between bilinear and bicubic interpolation of travel time added. 'crtpfa.for','crtpfa.inc': New program CRTPFA to calculate two prevailing-frequency coupling-ray-theory S-wave Green tensors along each input reference ray, to double the input reference rays, and to write the first of the doubled rays with the first Green tensor, and the second of the doubled rays with the second Green tensor. 'pfatubes.for','pfatubes.inc': New program PFATUBES to modify the file 'CRT-T' with indices of triangles in order to enable interpolation within ray tubes formed by rays written by program CRTPFA. 7.10 (2014, June): 'crt.htm': Compiling instructions updated. 'green.for': *** Serious error in writing the output formatted file with the Green tensor without sorting according to receivers has been fixed. *** 'init.for': Declaration of dummy variable DUMMY improved. 'pfatubes.for': Comments updated. 'ray.for': Comments considerably updated. 'raycb.for': Error in storing the spatial gradient of the Hamiltonian function at surfaces in anisotropic media fixed. Missing initialization of parameter CRTANI in subroutine CDEF added. Missing initialization of ISHIFT in the initial point of the ray added. Comments updated. Description of subroutine PVINT added. 'rpar.for': *** Error in subroutine IHIST fixed. *** Minor update of the dimension of array IY. 'trans.for': Reason of termination IEND=37 renamed to 27, minor update of the dimension of array IY, comments updated. 'wfsrf.for','wfsrf.inc': Minor bug in declaration of character variables removed. 'wan.for','crtpfa.for','crtpfa.inc': "Single-frequency" changed to "prevailing-frequency". *** new *** 'rpar.for','crtin.for': New SEP parameter KMAHI enabling to exclude the KMAH index from the ray history. 'rpplot.for','rpplot.inc': Plotting of symbols and numbers corresponding to the plotted ray histories under the horizontal axis of the figure coded. 'an.for','crtin.for','crtpfa.for','init.for','pointc.inc', 'ray.for','raycb.for','trans.for','wan.for','writ.for', 'writ.inc': New possibility to trace anisotropic-ray-theory S-wave rays instead of common S-wave rays using new version of hder.for from package MODEL. New SEP parameter KSWAVE. New SEP parameter DSWAVE describing the minimum difference between the eigenvalues of the S waves. New reasons IEND=38 and 75 of termination of ray tracing.